Kingston USB DataTraveler I Installation Instructions for Windows 98SE
----------------------------------------------------------------------
		
Note: If your system is running Windows 2000 or XP it is not necessary to install this software.
Simply plug in the hardware and the necessary driver files will be installed by Windows 2000 or XP.

Windows 98SE Users:

NOTE: DO NOT INSERT DATATRAVELER I BEFORE THE DRIVER IS INSTALLED AND SYSTEM HAS REBOOTED!

1. Download the file named "F12DTI.exe".

2. Decompress the "DTI.EXE" file by double clicking on it. Extract it to a location of your choice.
   Be sure to note the location where the files are extracted. The default location is c:\temp\KUSBDTI

3. Double click on the KUSBDTI.exe icon in the location from step 2 to start the installation program.

4. Follow the directions on the screen. Click "Yes" and "Next" where appropriate.

5. The Install Shield will display a "Please remove DataTraveler 2.0" information message. Please confirm that the
   DataTraveler is not plugged into the USB port, then click OK.
   
6. Windows will install the appropriate driver for the DataTraveler, then display: "InstallShield Wizard Complete." 
   You will also be prompted to restart your computer. Please select "Yes, I want to restart my computer now" then click
   Finish.

7. DO NOT INSERT THE DATATRAVELER YET! A driver database will build itself and you will then receive a message which 
   reads,"You may insert the DataTraveler 2.0 device at anytime." DO NOT INSERT THE DATATRAVELER YET! Please click Finish 
   and allow the computer to completely reboot prior to inserting the DataTraveler into the USB port.

8. Once the computer reboots, plug in your DataTraveler to complete the installation. You should now have a new 
   Removable Disk icon in My Computer and/ or Explorer. Transferring files to the DataTraveler is a simple drag and drop
   operation.



Win98SE Installation FAQ 
--------------------------------------------------------------------

Q. During the installation of the Data Traveler the Hardware Wizard did not locate a proper driver for the
   Data Traveler and now there is an "Other Devices" listed in the Device Manager and the new drive letter for the
   Data Traveler is not displayed in "My Computer."

A. You have not properly installed the drivers for your Data Traveler. In order to resolve you will need to first 
   download the appropriate driver. Please use the URL provided to download the proper DTI driver.
   http://www.kingston.com/support/downloads/usbdatatrav/F12DTI.EXE Be sure to download this driver to a location 
   that you can remember. Now you will need to update the driver for the Data Traveler listed under "Other Devices."
   In order to do this, please follow the steps provided.

	1)In Device Manager, Right click on the Data Traveler listed under "Other Devices," and select "Properties."
	2)Access the "Driver" tab and select "Update Driver." This will begin the "Update Driver Wizard."
	3)During the "Update Driver Wizard" be sure to select the "Search for a better driver" option and click next.
        4)In the "search for updated drivers," window, make sure "Specify a location," is the only option selected, 
          then click Browse.
	5)Locate the driver that you have previously downloaded and click O.K.
	6)Now you are ready to install the drivers for the Data Traveler. Click Next>Next>Finished.
	7)Once you close the "Update Device Driver Wizard," the installation should complete and a new
	  "Removable Disk," icon should display in "My Computer."